
Electrical Panel Replacement in Edgewood, KY
Local Electrical Panel Pros Who Know Edgewood
Most houses in Edgewood were built between 1960 and 1979, Census figures show, and nearly all are owner-occupied single-family homes. Their panels were sized for the house as it stood then, and many are now full. Close to half the homes heat with electricity, a big load in winter. Owners often call before adding a car charger or finishing a basement. We check the panel, its breakers and feed, and the meter base, tell you if a repair will do, and agree the price before anything comes out.
Urgent Electrical Panel Problems in Edgewood
A panel that smells of burning, runs hot, hums or sparks should be seen today, as should a stubborn breaker. If a basement leak has soaked it, nobody touches it. Only switch power off where the floor is dry. Smoke or flames mean everyone leaves and dials 911. We’re out the same day on most calls, weekends included.
Signs a Home in Edgewood Needs a New Electrical Panel
In the 1960s and 1970s houses across Edgewood, these are the signs owners usually call about:
- A full panel with no open slot for the charger an owner wants in the garage
- Breakers that trip when the electric furnace and the dryer run on a winter evening
- Lights that flicker across the house whenever the central air starts
- A warm breaker with a faint burning smell in a 1970s basement panel
What to Expect From Electrical Panel Replacement in Edgewood
- 1
We Check the Panel First
Breakers, wiring, service size and the meter base.
- 2
You Approve the Price
A fixed flat-rate quote before the old panel comes out.
- 3
Permit and Inspection Handled
We pull the permit and see it through final inspection.
Happy Homeowners
Why Homeowners in Edgewood Choose Degree of Comfort
Five Paws Across the Board.
Family owned since 1993, 33 years of experience
Hear more from our customersPanel replacement for 1960s and 1970s houses in Edgewood
Call NowBenefits of a New Electrical Panel for Homes in Edgewood
The big gain is space. A 1970s panel that’s already full can’t take a charger, a heat pump, a hot tub or a basement remodel without something tripping, and a new one can. Each circuit gets labeled, so shutting off the kitchen or garage takes seconds instead of trial and error. Fresh breakers reset cleanly, where worn ones may trip for no clear reason. And because a buyer’s inspector opens the panel early in a sale, a new one is one less item on that list.
Electrical Panel Repair or Replacement in Edgewood
Plenty of panels here need just one part. A breaker that won’t latch, a lug that has loosened and cooked its wire, or one faulty circuit gets fixed, and the rest stays. A new panel makes sense when every space is used and you need more, when there’s char on the bus, when the house still runs fuses, or when the model can’t be supplied with parts. Both numbers go on the quote. First, give the tripped breaker another try. Then check the test-and-reset outlets in the kitchen, baths, garage and outside, because a popped one can switch off ordinary outlets elsewhere.
Sizing and Permits for a New Electrical Panel in Edgewood
Size gets set by how the family runs the house now and by what’s coming, the charger, a heat pump or an addition. If the meter base or the line from the pole is tired, the job grows, and the quote says it plainly. Duke Energy Kentucky disconnects and reconnects at its meter while we work from the meter base inward. Permit and inspection are on us, start to finish.
Why Homeowners in Edgewood Choose Us for Electrical Panel Replacement
Edgewood is mostly owner-occupied houses from the 1960s and 1970s, and we know the panels they came with. You get licensed, insured electricians, a flat price agreed before work, and no overtime fees.
Electrical Panel Replacement FAQs for Edgewood
Kenton County’s Planning and Development Services handles building and HVAC permits for Edgewood. Which office covers the electrical side, we confirm job by job rather than guess here. Either way, we pull the permit and arrange the inspection, so you won’t be calling any office or filling out forms.
It does. Close to half the homes in Edgewood heat with electricity, and an electric furnace or baseboard heat draws a lot. We add it to the water heater, range and dryer when we size the panel, so a January evening with everything on doesn’t end in the dark.
We open the panel, then name one flat rate. The new panel, the level of service the house should carry, any meter base swap and the permit all feed into it. A straight basement change runs less than one that adds service for a charger. Work starts after your yes.
Most often here, a panel from the 1970s has no space left on the day the owner plans a charger or a heat pump. Watch too for frequent trips, lights flickering when the air conditioner or electric heat kicks in, a burning smell, or scorch marks.
No. Switching off the main doesn’t make the meter cables safe, the utility has to come out and pull the meter, and a permit plus a sign-off are required. That’s high-voltage work, and only licensed electricians from our team do it.

Need Electrical Panel Replacement in Edgewood?
Call now for fast, licensed service in Edgewood, KY, or request an estimate.
Call (513) 586-5107Request Panel Replacement in Edgewood. We’ll call you back.
(513) 586-5107Call · Mon–Sun: 8am–8pm
Step 1 of 2










